|
|
You can conduct the installation with
little sun light as long as you have black light available.
However it is easier to do so with darker enviornment. |
|
|
Installation is easy, it simply replace
your current wallpaper. Compare our installation with conventional
Air Brush.
You can enjoy the black light art with our price, installation,
and design. |
|
|
|
| Numbering is printed on the back. Please
apply it in the order. Numbering start from the left. |
 |
|
Place the first sheet vertically.
(overlaps 2 to 3 cm on the side then cut the center of overlaps
portion "Kasane Giri")
When you start from the left, start the number 1, starting
from the right makes the number 8 to be the first.
After the first sheet, you can place the sheet as regular
wallpaper.
We recommend fluorescent/mercury Black lights. The ink
will not illuminate with Black lamp.
Rate of illumination differs with distance/angle of the black
lights.
The surface is laminated however, scratch, rubbing causes
the coating to come off.
Base of the wallpaper is Olefin. Oven time should not exceed
more than 15 mins.
When the ground is print plywood laminate, or painted, illumination
rate of the design might be low. In that case, we can have
laminate coating on both side. (see notes for more detail).
|
|
|
 |
| |
First
start with the sheet with design, place it vertically.
Start from the number 1, place the sheet from left side
first. then number 2.
After the sheet with design is placed, place the non-designed
sheets.
In the picture shown above, the height of the sheet is
240cm, to make the picture above, you would need 4 of
those 240cm equal 960cm. We recommend having extra 100cm.
Total non-design sheet recommended is 10.6m.
* Wallpaper is cutted in the width of 90cm. All you have
to do is line them up and place it on the wall.
* With dried adhesive, you can preserve the sheet for
longer period and ready to use when you need it. |
 |
|
| ※ |
Maximum
width of the "DIY Choice" is 1800mm. |
| |
(It is due to the technical
reasons when installation.) |
| ※ |
When
Installing, regular light will not illuminate the design,
you will need backlight to check. |
| ※ |
There
is not "Repeat" that usual wallpaper has. Therefore even
small deformation on installation could cause unmatched
designed. (Overlapping placement could cause wrinkle or
peering) |
| ※ |
Depends
on the condition of use, but the color last for 2 to 3
years. |
|
|
 |
Sick
house prevention Information
|
Class of certification |
Certified JIS Number
or
Ministry Certified Number |
Formaldehyde
dispersion rate |
Name
of manufacture
or
the certification holder |
| ministry
certified |
MFN-0442 |
F☆☆☆☆ |
Sun-lock
industry inc. |
Fire Protection/Certification
Number
| Base
material | Installation
Procedure | Fire
Prevention | Certification
Number |
1.
Fire prevented base
2. Fire prevented plaster board
3. Semi-Fire prevented base
4. Metallic board
5. Flame resisting base |
Direct
placement |
Semi-fireproof
Semi-fireproof
Semi-fireproof
-
- |
QM-9608
QM-9608
QM-9608 |
6.
Fire prevented base
7. Fire prevented plaster board
8. Semi-Fire prevented base |
Underlay |
- |
|
*Installation procedure should
be following "Standard Procedure for Fire Prevented Wall" issued
by Japan Wall Covering material association
*You can attach "Fire Prevention control label" with the procedure
above. |
|
|
